Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.
It is essential to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows could cause significant damage to your home and even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.
For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame of the previous one easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this case, you will need to find some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.
If you plan to try to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.
After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you might think about the security door with an integrated window, as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. It is crucial to act immediately if you notice your uPVC windows are sagging.
To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fit. If you are happy with the fit of your window, tighten the screws to secure them in place.
If you are unable to reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
uPVC handles could also loosen. Most often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.
3. Water Leaks
If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. The most frequent reason for leaks in upvc windows repairs near me windows is that the sealant surrounding the frame is either damaged or missing.
This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer is applied. When it comes to uPVC repair, it is important to be careful not to over-caulk. This will only make your window more difficult to clean and lower its energy efficiency.
It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might need to consider replacing the window.
Mold spots and rotted sills are other signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.
It is also important to keep in mind that if the leak originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or Repairs to uPVC Windows sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or slack and open with ease it could be the hinges that are at the fault. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.
Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple procedure, but it is easier when you have a person to assist in holding the frame up.
It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The issue can be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us photos via our website will often solve the issue. We are happy to provide suggestions.
It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a few various factors. The hinges may also become unbalanced due to wear, causing an opening between the frame and sash. If they're beyond repair, it could be necessary to get them re-aligned. Second, the interlock can be misaligned. It is located on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace these.
These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the possibility of draughts.
One of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.
Your upvc windows can continue to provide excellent insulation and Repairs to uPVC Windows security to your home with regular maintenance and repairs. It is crucial to realize that all windows have a life span and there may come the point when it's more efficient to replace them than repair them. If you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as you can.