5 Laws That Anyone Working In Repairs To Upvc Windows Should Be Aware Of

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need to locate some plastic spacers that assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from entering the home until a professional can come out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a variety of issues that include sagging. A sagging upvc window repair near me window can cause issues with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need open the window to access the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in position.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. Most often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and wet floors. Water leaks from windows are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer can be put on. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed window repairs glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with an ease. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier to do if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be happy to give you advice.

It is also essential to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become unbalanced due to wear, causing an opening where the sash and frame meet. If they're beyond repair, it may be required to realign them. The interlock may also become disaligned. This is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace these.

The next most common cause of draughts is the window seals. These can become worn down or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it is cheaper to replace them rather than repair them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.